{"id":480,"date":"2026-09-23T11:02:17","date_gmt":"2026-09-23T03:02:17","guid":{"rendered":"http:\/\/www.pharmissue.com\/blog\/?p=480"},"modified":"2026-09-23T11:02:17","modified_gmt":"2026-09-23T03:02:17","slug":"how-to-store-embroidery-machine-accessories-properly-4294-95af4c","status":"publish","type":"post","link":"http:\/\/www.pharmissue.com\/blog\/2026\/09\/23\/how-to-store-embroidery-machine-accessories-properly-4294-95af4c\/","title":{"rendered":"How to store embroidery machine accessories properly?"},"content":{"rendered":"

Hey there, if you\u2019re anything like my customers, you\u2019ve probably got a drawer full of embroidery machine accessories that look like they survived a cross-country move\u2014needles tangled in thread spools, presser foot clips covered in lint, bobbin cases that won\u2019t snap right back into place. I\u2019ve been in the embroidery machine accessories game for 7 years now, and let me tell you: proper storage isn\u2019t just about keeping things neat. It\u2019s about saving you from throwing away bent needles mid-project, ruining a pricey bobbin case because it got dented, or wasting 20 minutes digging for a specific size thread cutter when you\u2019re on a deadline. As someone who ships these parts to sewers, small shop owners, and hobbyists every single week, I\u2019ve seen what happens when people wing it with storage\u2014so today, I\u2019m spilling the exact, no-BS way to keep your accessories in top shape. Embroidery Machine Accessories<\/a><\/p>\n

<\/p>\n

First off, let\u2019s get one thing straight: embroidery machine accessories aren\u2019t all the same. Storing a set of needles is way different than storing a spool of metallic thread, right? And if you mix them, you\u2019re asking for trouble. Lint and loose thread are the biggest culprits here\u2014they\u2019re tiny, they get everywhere, and they\u2019re the number one cause of dull needles, jammed bobbin cases, and broken thread. I used to have a customer, a lady who runs a little custom embroidery shop out of her garage, who stored all her accessories in a chipped plastic bin. Every time she\u2019d pull out a needle, there was lint crammed in the eye, and her metallic thread would get snagged on loose bits of plastic from the bin. She ended up ordering twice as many needles and bobbin cases in a month just because she was ruining them from bad storage. That\u2019s money down the drain, plain and simple. So step one: sort every accessory as soon as you\u2019re done using it. Don\u2019t wait till you finish that big order to tidy up\u2014do it right after you wrap up a session, because once you walk away, half the stuff will get knocked around.<\/p>\n

Let\u2019s start with the most critical part: embroidery needles. These things are tiny, super sharp, and bend like a wet noodle if you so much as drop them wrong. I\u2019ve seen people stick loose needles in a drawer, and guess what? One got stabbed by a sewing machine needle while they were reaching for thread. Ouch. The worst part? Bent needles don\u2019t just ruin your fabric\u2014they can scratch your machine\u2019s needle plate, which is a way bigger fix. So how to store needles right? Ditch the flimsy plastic needle cases that come with most starter kits. I recommend the metal, hinged ones you can get from most sewing supply shops\u2014they keep sharp points from poking through and bending, and the metal doesn\u2019t let static build up like plastic does. For small sizes (like 75\/11 or 80\/12), I use the ones with little grooves to hold each needle upright\u2014no more mixing size 90\/14 with size 70\/10. Oh, and for used needles? Don\u2019t toss them in the trash right away\u2014they\u2019re still sharp! Stick them in a separate section of the needle case, or even a old pill bottle with a hole punched in the cap for easy disposal later. Pro tip from my shop: we add a tiny silica gel packet to every bulk needle order, and you should too. Moisture is the enemy of metal\u2014rusted needles are useless, and they leave little brown spots on fabric. I can\u2019t tell you how many customers email me saying their needles turned brown after a month of being in a damp drawer. So keep that moisture out.<\/p>\n

Next up: bobbin cases and bobbins. These are the workhorses of embroidery, and they get neglected all the time. I\u2019ve seen people toss bobbins in a jar loose, and then they get scuffed up or tangled together. A scuffed bobbin won\u2019t spin right, which causes tension issues mid-stitch\u2014and we all know how much that sucks, especially when you\u2019re stitching a name on a wedding dress. For empty bobbins, sort them by size (there\u2019s no standard, so make sure they match your machine!) and store them in a plastic case with dividers. The ones that look like egg cartons? Perfect for small batches, but if you\u2019ve got 50+ bobbins, get a stackable case with clear lids so you can see what size you need without opening every drawer. For filled bobbins\u2014you know, the ones with thread already wound\u2014don\u2019t leave them hanging on spool pins or tossed in a pile. Wrap them loosely in acid-free tissue paper (cheap at any craft store) to keep the thread from getting dusty or snagged. And bobbin cases? Don\u2019t stuff them in a drawer with your tools! They have tiny springs and internal parts that can get bent or lint-clogged. Store them in a hard-shell case with individual slots, and wipe them down with a lint-free cloth every time you switch them out. I always include a small microfiber cloth with every bobbin case order I ship, because half the time people don\u2019t realize they need to clean these little guys.<\/p>\n

Then there\u2019s presser feet, needles plates, and other small metal tools\u2014like thread snips, seam rippers, and the little screwdrivers you use to adjust tension. These are easy to lose, and if they get mixed with fabric or thread, they can snag and ruin your projects. I recommend a magnetic strip for these\u2014mount it on the wall above your machine, and every time you\u2019re done with a presser foot, snip, or screwdriver, just stick it on the strip. No more digging through drawers, no more losing that tiny screwdriver you needed for last-minute adjustments. The best part? Magnetic strips don\u2019t damage metal, and they keep everything in plain sight. I tried using a plastic tray once, and half my presser feet would slide under the tray and get covered in dust. Now I swear by the magnetic strip\u2014all my shop guys use them, and we haven\u2019t lost a single tool in two years. Just make sure you get a strong enough one for heavier stuff, like metal needle plates. Don\u2019t skimp on a cheap weak strip\u2014your presser foot will fall off and get scratched.<\/p>\n

Now, what about thread? Because embroidery thread is a whole different beast. I\u2019ve seen people store metallic thread in a drawer, and it gets tangled up with cotton thread, or so dusty you can\u2019t pull it off the spool without it breaking. Metallic thread is especially finicky\u2014it\u2019s coated, so it gets static-y and snags way easier than regular cotton or polyester. So how to store thread? First, use thread racks. Not the flimsy wooden ones that tip over\u2014get a sturdy, plastic or metal rack that fits under your table, so it\u2019s out of the way but easy to reach. Sort your thread by color or type (metallic, cotton, polyester) so you can grab what you need fast. For spools that aren\u2019t on the rack\u2014like half-used spools you\u2019re saving for a project\u2014get individual spool caps. They\u2019re tiny plastic tops that fit over the end of the spool, keeping the thread from unraveling and getting dusty. I used to use rubber bands, and they\u2019d leave marks on the thread, which is super noticeable on light fabric. Spool caps are way cheaper than ruined thread, trust me. And for metallic thread? Keep it in a cool, dry place\u2014never leave it in direct sunlight, because the sun can fade the color and make the coating brittle, which causes breakage mid-stitch. I once had a customer who left her metallic spools on a windowsill for a week, and half of them snapped while she was stitching a logo for a local caf\u00e9. She ended up redoing the whole thing, which cost her time and money. Lesson learned.<\/p>\n

Wait, let\u2019s not forget about the big, bulky stuff\u2014like extra hoops, machine covers, and thread cones. Hoops are expensive, especially large ones, and if you store them wrong, they can get bent or warped. Never stack them flat on top of each other\u2014their edges will dig into each other and leave permanent marks. Stand them upright in a hoop rack, or lean them against a wall, spaced out so they don\u2019t touch. If you don\u2019t have room for a hoop rack, use a large, fabric storage bin with dividers for each size. Machine covers? Don\u2019t toss them on the floor when you\u2019re done embroidering for the day. Wipe down your machine first (with a lint-free cloth, obviously) and then put the cover on\u2014this keeps dust and lint from getting inside, which is the number one cause of machine breakdowns. I can\u2019t tell you how often I get a call from a customer saying their machine is jamming, and when I ask if they clean it and cover it after use, they say no. 9 times out of 10, the issue is just lint in the bobbin area. A little storage habit goes a long way.<\/p>\n

I also want to talk about the mistake that a lot of new embroiderers make: mixing personal and bulk accessories. If you run a shop or do custom orders, you probably have a bunch of bulk bobbins, needles, and thread cones for big projects, and a small set of personal accessories for your side projects. Don\u2019t mix these! Bulk bobbins are usually not wound as tightly, and if you mix them with your personal filled bobbins, the thread will get tangled and ruined. I recommend getting separate storage bins for personal use and bulk use\u2014label them clearly, so you don\u2019t accidentally grab a bulk bobbin for a wedding order that needs a specific tension. It sounds simple, but it saves so much time. Another thing: label everything. I can\u2019t stress this enough. How many times have you bought a pack of needles, used one, and then had no idea what size it was when you went back for more? Stick little labels on your needle cases, bobbin holders, and thread racks\u2014write the size, type, and even the date you opened it if you want. It takes two seconds, but it eliminates so much guesswork.<\/p>\n

And hey, if you\u2019re short on space? I get it. Not everyone has a huge sewing room. If you\u2019re working in a small apartment, use stackable clear storage bins that fit under your bed, or hanging organizers on the back of a door. There are even small magnetic thread racks that fit on the side of your machine, so you can keep your most-used colors within arm\u2019s reach without taking up table space. I sell a line of space-saving storage organizers for exactly this reason\u2014my customers in small studios swear by them. Just make sure whatever you use is airtight if you live in a humid area. Humidity is a big problem for folks in places like Florida or the Pacific Northwest\u2014moisture can make metal rust, thread mold, and plastic warp. If you\u2019re in a humid climate, add those silica gel packets to every storage bin, and keep your accessories in a climate-controlled area (not a basement or attic, which swing in temperature and humidity). I\u2019ve had customers in Louisiana tell me that adding silica gel to their needle cases cut their rusted needle issues by 80%\u2014that\u2019s a game-changer.<\/p>\n

Now, let\u2019s talk about what you should definitely avoid. First, don\u2019t use unsealed containers. Cardboard boxes are fine for moving, but long-term storage? No way\u2014they attract dust, bugs, and moisture. I\u2019ve had a customer find a moth in her old cardboard storage box, and it ate half her metallic thread. Yeah, that was a mess. Second, don\u2019t overstuff your drawers or cases. If a case is too full, things will bend, break, and get tangled. It\u2019s better to have two small cases than one overstuffed one. Third, don\u2019t store accessories near your fabric bins. Fabric sheds lint, and that lint will get on your needles, thread, and tools. Keep your accessory storage separate from your fabric storage\u2014even if it\u2019s just a different shelf. Fourth, don\u2019t ignore used accessories. Used needles are sharp, as I mentioned before, and used bobbins with leftover thread can unravel and get tangled if you just toss them in a pile. Sort used accessories as soon as you\u2019re done, too\u2014you\u2019ll thank yourself later.<\/p>\n

At the end of the day, storing your embroidery machine accessories right is all about being consistent. It\u2019s not a chore you have to do once a month\u2014it\u2019s a 2-minute tidy up after every project. I\u2019ve seen customers go from wasting $50 a month on bent needles and scuffed bobbins to spending next to nothing once they got their storage system sorted. It\u2019s like changing the oil in your car\u2014you don\u2019t want to do it, but it saves you from way bigger problems later.<\/p>\n

<\/p>\n

If you\u2019re still figuring out your storage system, or you need high-quality accessories to keep that system running smooth, feel free to reach out to our team for a chat. Whether you\u2019re a hobbyist just starting out or a small shop looking to restock on bulk supplies, we can help you pick the right storage solutions for your space, or answer any questions you have about keeping your parts in top shape. We\u2019ve been in this game long enough to know what works and what doesn\u2019t, and we\u2019re always happy to share tips\u2014no sales pitch required, just fellow embroidery lovers helping each other out.<\/p>\n

Combination Embroidery Machine<\/a> References:<\/p>\n

    \n
  1. The Complete Guide to Embroidery Machine Maintenance, Sew News Magazine, 2022<\/li>\n
  2. Textile Storage and Preservation Handbook, American Textile Institute, 2021<\/li>\n
  3. Bobbin and Needle Care for Modern Embroidery, Craft Industry Alliance, 2023<\/li>\n<\/ol>\n
    \n

    Yiwu Kuhao Import and Export Co., Ltd.<\/a>
    As one of the most professional embroidery machine accessories manufacturers in China, our products have good reputation in the market. Welcome to buy discount embroidery machine accessories made in China here and get quotation from our factory. All customized products are with high quality and low price.
    Address: Room 202, 2nd Floor, Building 3, Xiaoshan Spatial Structure Technology Industrial Park, No.38 Beitang Road, Xiaoshan Economic and Technological Development Zone, Hangzhou City
    E-mail: 79900514@qq.com
    WebSite:     https:\/\/www.kuhaoembroidery.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

    Hey there, if you\u2019re anything like my customers, you\u2019ve probably got a drawer full of embroidery … How to store embroidery machine accessories properly?<\/span>Read more<\/a><\/p>\n","protected":false},"author":134,"featured_media":480,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[443],"class_list":["post-480","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-embroidery-machine-accessories-4eec-95f4de"],"_links":{"self":[{"href":"http:\/\/www.pharmissue.com\/blog\/wp-json\/wp\/v2\/posts\/480","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.pharmissue.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.pharmissue.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.pharmissue.com\/blog\/wp-json\/wp\/v2\/users\/134"}],"replies":[{"embeddable":true,"href":"http:\/\/www.pharmissue.com\/blog\/wp-json\/wp\/v2\/comments?post=480"}],"version-history":[{"count":0,"href":"http:\/\/www.pharmissue.com\/blog\/wp-json\/wp\/v2\/posts\/480\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.pharmissue.com\/blog\/wp-json\/wp\/v2\/posts\/480"}],"wp:attachment":[{"href":"http:\/\/www.pharmissue.com\/blog\/wp-json\/wp\/v2\/media?parent=480"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.pharmissue.com\/blog\/wp-json\/wp\/v2\/categories?post=480"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.pharmissue.com\/blog\/wp-json\/wp\/v2\/tags?post=480"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}